One Touch Horizontal Dual Balance
Beam
The horizontal dual beam balance design
ensures the gas flow is perpendicular to the weight direction, which means that
there is no effects caused by purge gas flows and buyancy effects, even when
using high gas flows up to 1000 ml/min. Other effects such as chimney,
convection and thermal molecular flow effects are also eliminated.
The patented one touch type dual balance
beam design allows the user to exchange the beam by themselves easily. Light
weight balance beam gives the EXSTAR 6000 series TG/DTA the highest sensitivity
and stability.
The EXSTAR 6000 series TG/DTA also
provides high quality results for very low mass losses over the full
temperature range.
The EXSTAR 6000 series TG/DTA also provides drift-
free baselines and ensure the high sensitivity and high accuracy measurements.
No temperature overshoot and fast properties are realized by the SIINT patented
advantage digital control technology .
Temperatures for both sample are measured
AT THE SAMPLE, which means true sample
temperatures are recorded unlike many systems which only record furnace
temperatures.
Pre-Calibration Function
The EXSTAR series TG/DTA provides direct temperature
calibration and pre-calibration functions by using high purity metal standards
which are measured in the DTA mode. The thermocouple is in direct contact with
the sample holder which ensures the very high precision temperature
measurmement. In addition, the unique software design makes the precalibration
very easy to perform.
Controlled rate Thermal Analysis
(CRTA)
Controlled rate Thermal Analysis (CRTA) is supplied as
standard . This unique measurement method automatically controls the heating
rate in response to the physical property change of a sample.
Highway Measurement: simulate slow heat
rates
The Highway method is a truly unique feature
available as standard, designed to obtain data on very slow heating rates,
based on measurements done at much higher rates. The method is based on
advanced mathematical methods and provides accurate results.
Reactive Atmosphere handling
A separate purge port for reactive and corrosive purge
gases is available. The separate port is designed to permit the introduction of
corrosive or any special purge gases into the reaction chamber directly,
without going through the balance housing.
Reliable, Compact Auto Sampler
The EXSTAR 6000 series TG/DTA can be coupled with the
rugged autosampler AST-2 for fully automated and unattended operation. With up
to 30 sample positions and a mechanical finger design the AST-2 offers reliable
and fully automated operation.
