General Labware

Sherwood Laboratory Fluid Bed Dryer

Sherwood Scientific have developed and manufactured a range of two general purpose Fluid Bed Dryers (FBDs): one analogue and one with digital controls of airspeed, temperature and time. In addition, Sherwood Scientific have also developed a programmable FDB where drying programmes can be created and stored on computers. Benefits The laboratory fluid bed dryer offers significant advantages over conventional drying techniques: • The high rates of heat and mass transfer ensure much faster and more homogeneous drying than other methods such as oven and vacuum drying. • Drying times range from a few seconds to minutes. Complete drying is usually…

Filter Bag Materials

Filter bags fit to the top of the drying tubs to retain any stray particles of the sample being fluidised while allowing the passage of the exit gases. There are two sizes of bag in a wide choice of materials to ensure compatibility with the substance being dried and the drying temperature. Benefits • Nylon bags are resistant to alkali vapours. • Terylene shows greater stability with acids. • Polypropylene in inert to most chemicals but is less suitable over 100°C. • Nomex, a special alkali-tolerant material, is available for sustained high-temperature drying e.g. around 200°C. • A fluorocarbon filter…

XRF Consumables and Sample Preparation

SciMed offers a complete range of sample preparation solutions. A full range of consumables are kept in stock for rapid delivery. These include: • liquid/powder cups • sample film • fusion flux • Lico Wax for pellets We also stock the unique Patented Ultra Carry and Micro Carry Films. As part of our commitment to offer a complete package, we also provide: • manual and hydraulic presses • mills • pellet dies • automated fusion equipment for making fused beads Contact us now > Or call us now on 0161 442 9963 to speak to a Product Specialist.

CO2 Reagents from Reagecon

SciMed offers a complete set of CO2 Reagents. SciMed has successfully supplied the brewery industry. Reagents in stock at our Stockport Wharehouse. Standards include: Atomic Absorption, Ion Chromatography Standards,Carbon Dioxide Standards,Ion Selective Electrode Standards,Chemical oxygen demand (COD) Standards, Milk Testing Standards,Chloride Standards Mixed Standards,Conductivity Standards ,Organic Standards, Flame Photometer Std,Redox Standards,Hazen colour standards,Spectrophotometric Standards ,ICP,TDS Standard, Inorganic Standards and Turbidity. Contact us now > Or call us now on 0161 442 9963 to speak to a Product Specialist. You can also visit the Reagecon website for more product details by clicking on their logo below:

Certified Standards

SciMed can supply a full range of Certified standards for use with the following analytical techniques: • XRF: liquids (oil and water), powders and synthetic fused beads • AAS, ICP, ICP-MS single and multi-elemental stock solutions • TOC • Elemental Analysers Contact us now > Or call us now on 0161 442 9963 to speak to a Product Specialist.

Kühlmobil Water Air Cooled

This range of chillers forms the core of the Van der Heijden products. The features of this range are: • 39 different models • 100% water saving • cooling temperature adjustable • minimal space • noiseless • easy to use • 10 to 140 litres/min • fuel capacity 5–250 litres • power 180 watts to 40 KW • 2 years warranty Contact us now > Or call us now on 0161 442 9963 to speak to a Product Specialist. You can also visit the Van der Heijden website for more product details by clicking on their logo below.

Water-Water cooling

If there is a circulating water circuit within the building, a Van Der Heijden Water-Water chiller may offer the best solution. Water-water coolers from Van der Heijden are available in the same performance versions as the standard KÜHLMOBIL. All the models are specially designed to run from existing water circuits and can be supplied with outputs of up to 150kW. Features All models are equipped with: • bypass • manometer • sensor (to monitor the flow) The temperature control is part of the secondary circuit. A motorised valve on the primary circuit automatically regulates the water volume. Benefits • very…

COOL-CARE® aircooled

COOL-CARE® is a unique range of air cooled chillers. This chiller is ideally suited for cooling after-condensers used in conjunction with membrane vacuum pumps. The COOL-CARE® applies the same principle as a circulating cooler. A refrigerating unit cools the circulating water or anti-freeze mixture in a small container made out of V2A, from where a circulating pump conveys it to the unit which is to be cooled. Range of application • HPLC • Electrophoresis • Micro-Rotis • Soxleth • Water baths – and more Benefits • 100% water savings • Temperature of cooling water can be set as required •…

Water Chiller by Van der Heijden

SciMed offers the full range of Van der Heijden cooling thermostats and flow coolers. Principle. A compressor cools water or a solution of water with anti-freeze to the selected temperature in an internal buffer. This chilled water is then circulated via a pump through to the cooling equipment or setup. The product catalogue from Van der Heijden contains 39 standard models of chillers with cooling capacities between 180 watt and 40 kW. Available technologies • Air-cooled • Liquid cooling (with compressor) and air-cooled condenser (heat from chiller will go into the room) • Liquid cooling (with compressor) and water-cooled condenser…